EADP10 시험문제 덤프 Esri 자격증

네트워크 전성기에 있는 지금 인터넷에서Esri 인증EADP10시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Esri 인증EADP10시험을 한방에 통과하도록 도와드립니다.

Esri EADP10인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.Esri EADP10시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는Esri EADP10관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸Esri EADP10관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게Esri EADP10응시하는데 많은 도움이 될 것입니다.

취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. Esri인증 EADP10시험은 널리 인정받는 인기자격증의 시험과목입니다. Esri인증 EADP10시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의Esri인증 EADP10덤프는 시험패스율이 높아Esri인증 EADP10시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.

ITExamDump는Esri인증EADP10시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Esri인증EADP10시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Esri인증EADP10시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.

Esri인증 EADP10시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 Esri인증 EADP10덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여Esri인증 EADP10시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.

시험 번호/코드: EADP10

시험 이름: Esri (ArcGIS Desktop Professional)

EADP10 덤프무료샘플다운로드하기: http://www.itexamdump.com/EADP10.html

NO.1 An ArcGIS user runs the Central Feature geoprocessing tool on a polygon feature class. The output
feature is far north of the center of the feature class
Why is the output feature off center of the feature class?
A. There are more polygons in the northern part of the feature class
B. The polygons in the northern part of the feature class are larger
C. The feature class is not in the same promotion as the data frame
D. A weight field is not specified
Answer: D

Esri   EADP10   EADP10자격증   EADP10인증   EADP10덤프

NO.2 Refer to the exhibits.
An ArcGIS user is attempting to create a relationship class between the two tables shown in the exhibit
using POSTAL_CODE and Zip_Code as the origin primary key and destination foreign keys, respectively.
However when the user tries to set the keys Zip_Code does not appear in the drop-down list of candidate
keys
What should the user do to successfully create the relationship class?
A. change the relationship type from non attributed to attributed
B. make sure both tables are in the same geodatabase
C. create data type compatible key fields
D. move both tables to the same feature dataset
Answer: B

Esri   EADP10   EADP10자격증   EADP10   EADP10 pdf

NO.3 Using street data for a large metropolitan area, which analysis method shows the nearest hospital to a
traffic accident?
A. closest facility
B. route
C. find nearest
D. least-cost path
Answer: A

Esri   EADP10   EADP10최신덤프   EADP10자격증

NO.4 An ArcGlS user plans to distribute a series of map documents where the amount of time the map file
can be viewed is limited.
Which format should the user create to specify a timeout period for these maps?
A. .mpk
B. .ipk
C. .pmf
D. .msd
Answer: D

Esri덤프   EADP10자격증   EADP10   EADP10 pdf   EADP10최신덤프

NO.5 An ArcGIS user is working with a composite address locator that consists of the following:
-Citywide Address Locator -Regional Address Locator -Nationwide Address Locator
How does a composite address locator work if no selection criteria are specified? (Choose two)
A. searches all locators in sequence
B. searches the largest address locator first
C. searches the smallest address locator first
D. searches until an address is found
E. searches the locator with the closest zone
Answer: B,D

Esri   EADP10자격증   EADP10 dumps   EADP10 pdf

NO.6 A user wants to connect new laterals to supply water to newly built houses. What edge type supports
this function.?
A. an edge between two junctions
B. a complex edge
C. a subtype of edge
D. a simple edge
Answer: D

Esri dump   EADP10자료   EADP10자료   EADP10

NO.7 Refer to the exhibit.
Based on the exhibit shown, what has the author of this map done to improve drawing performance?
A. created annotation
B. applied simple symbology
C. generalized features
D. set scale-dependent rendering
Answer: D

Esri   EADP10   EADP10   EADP10   EADP10기출문제

NO.8 An image that is displayed as draped over a digital elevation model (DEM) in ArcGlobe appears to be
overly pixilated.
Which property should be changed to make the image appear smoother?
A. stretch type
B. resampling method
C. contrast setting
D. unit conversion
Answer: C

Esri자료   EADP10   EADP10   EADP10 pdf

NO.9 When rematching geocoding results, a user notices that E St is being interpreted as East St. How
should a user resolve this issue for future geocoding?
A. remove the entry defining E to mean east in the geocoding XML files
B. recreate the address locator with new reference data
C. create a composite address locator where E is not recognized as east
D. change E to east in the input table to be geocoded before geocoding
Answer: C

Esri인증   EADP10   EADP10   EADP10자료

NO.10 Using the Spatial Analyst IDW (Inverse Distance Weighted) tool an ArcGIS user interpolates a point
feature class to a raster. The user notices that some high point values near the edge of the feature class
seem to have a dramatic effect on the output. This occurs even in areas that are far from the high edge
values
Which two parameters should the user consider changing in the IDW tool? (Choose two)
A. z-value field
B. search radius
C. power
D. output cell size
E. weight
Answer: D,E

Esri   EADP10자격증   EADP10   EADP10인증   EADP10 pdf

NO.11 A taster contains pixels with decimal values.
Which method is used to round raster pixel values to the nearest whole number?
A. use the Round Up tool (Spatial Analyst), then the Round Down tool (Spatial Analyst)
B. use the Round Down tool (Spatial Analyst), then the Round Up tool (Spatial Analyst)
C. use the Plus tool (Spatial Analyst) to add 1, then the Minus tool (Spatial Analyst) to subtract 0.5
D. use the Plus tool (Spatial Analyst) to add 0.5, then the int tool (Spatial Analyst) to truncate to the
nearest integer
Answer: B

Esri자격증   EADP10 pdf   EADP10자격증   EADP10   EADP10   EADP10

NO.12 An ArcGIS user receives two shapefiles that are defined with the same projection and represent
features in the same study area. When they are displayed together in ArcMap, the difference of their
locations in coordinate space is so large that they are barely visible when viewed at their full extent.
How can the user determine whether the projections of the shapefiles are correctly defined?
A. by comparing the shapefiles to a correctly projected dataset that has a large enough extent to
encompass the study area
B. by systematically changing the spatial reference of the data frame until the shapefiles correctly align
C. by using the Spatial Adjustment toolbar to move the shapefiles to the same part of coordinate space
D. by examining the metadata of both shapefiles to determine the projection processes applied to the
data1
Answer: A

Esri pdf   EADP10자격증   EADP10   EADP10

NO.13 In the value for the latitude of origin in a projection tile is modified, making the value less negative
(e.g. from -45 to -28). which way does the data move?'
A. north
B. south
C. east
D. west
Answer: B

Esri   EADP10덤프   EADP10시험문제   EADP10

NO.14 A water utility company had received calls from several customers complaining of low water pressure.
Using a geometric network representing the water network, how can an ArcGIS user determine the most
likely location of the problem?
A. place junction flags on each customer water meter and use the Find Common Ancestors trace task
B. place junction flags on each customer water meter and use the Find Disconnected trace task
C. place a junction barrier on each customer water meter and use the Trace Upstream trace task
D. place a junction barrier on each customer water meter and use the Find Path upstream trace task
Answer: A

Esri시험문제   EADP10 dumps   EADP10

NO.15 An ArcGIS user created a geoprocessing script in which the output layer ¯ s sy m bo l ogy p r ope rt y i s se t t o
an existing layer file. The user intends to share the tool with another ArcGIS user.
How can the user share the script tool while maintaining the symbology in the output layer?
A. Share the script tool while the sumbology layer file embedded in it
B. Publish the script tool as a geoprocessing service to ArcGIS Server
C. Distribute the Toolshare folder containing the script tool and related data
D. Upload the script tool as a model to an FTP site
Answer: B

Esri   EADP10 dumps   EADP10   EADP10

Esri 인증EADP10시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의Esri 인증EADP10덤프자료에 주목하세요. ITExamDump의 Esri 인증EADP10덤프는 오로지 Esri 인증EADP10시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.