Cisco 642-732 덤프자료

ITExamDump 의 학습가이드에는Cisco 642-732인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. ITExamDump 을 선택하면 ITExamDump 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고Cisco 642-732인증시험도 고득점으로 패스하게 해드릴 것입니다.

Cisco인증 642-732시험은 등록하였는데 시험준비는 아직이라구요? Cisco인증 642-732시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Cisco인증 642-732덤프와의 근사한 만남이Cisco인증 642-732패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Cisco인증 642-732덤프로 시험패스에 고고싱하세요.

ITExamDump의Cisco인증 642-732시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Cisco인증 642-732덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.

많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.

Cisco 인증 642-732시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.

시험 번호/코드: 642-732

시험 이름: Cisco (Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0)

642-732 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-732.html

NO.1 Which three components and tasks should be considered while planning the site survey? (Choose
three.)
A. Determine the project scope, type of deployment, timeline, scale, budget, and users
B. Determine project stakeholders
C. Determine customer training requirements
D. Determine AP and controller placement
E. Determine the customer applications that the network will support
F. Determine radiospectrum and channel allocation
G. Schedule customer end user interviews
Answer: A,B,E

Cisco   642-732   642-732   642-732 dump   642-732시험문제

NO.2 You are working with a client that owns a six-story building in Charlotte, N.C. They occupy the bottom
three floors, and currently have a wired LAN. They have contacted you to perform a WLAN site survey of
their facility. Which three issues do you need to take into consideration before performing the site survey?
(Choose three.)
A. How many other organizations occupy the building?
B. Does the customer facility have a multistory atrium or lobby?
C. Protocol type required, client types in place, and client density?
D. Is WLAN coverage required in the elevators?
E. How many equipment closets do they have per floor and does the infrastructure all run back to a
central location?
F. How much signal bleedthrough is permissible between floors?
G. How much WLAN experience does the customer IT staff have?
Answer: B,C,D

Cisco   642-732   642-732자격증   642-732시험문제

NO.3 The customer had a 802.11b/g WLAN site survey and installation two years ago with the final service
performing as expected. Since that time, the customer has experienced modest customer growth while
maintaining employee headcount. New wireless applications are being evaluated along with a possible
temporary headcount increase, but the current WLAN performance has noticeable performance
degradation. What is the most likely cause of the WLAN performance problems.?
A. They have added a second microwave to the break room.
B. A new coffee shop with a wireless hotspot has opened across the street.
C. The customer has expanded their shipping capacity by 50%.
D. Employees are now using their smart phones and tablets in the office.
Answer: D

Cisco dump   642-732기출문제   642-732 dump   642-732   642-732덤프

NO.4 You have been contacted by a medium-sized hospitality company that has 50 hotels. They would like to
upgrade their existing WLAN in each hotel to 802.11n. While performing the site surveys for each hotel,
what are the issues that you need to take into consideration when determining the locations for each AP?
A. Selecting AP locations where power is already available.
B. Selecting APs that can be hidden in ceiling panels to provide a secure and clean aesthetic look.
C. Selecting locations that are easily accessed so maintenance and upgrades can be performed quickly.
D. Selecting locations that make visual assessment of the AP operation easy.
Answer: B

Cisco덤프   642-732   642-732   642-732   642-732

NO.5 After having the kick-off meeting for a new site survey project with your customer, which three factors
need to be considered prior to beginning a WLAN site survey? (Choose three.)
A. Will an additional trip to the facility to perform the initial walkthrough be required?
B. How much time should be allocated to survey the locations for the controllers?
C. Will any additional regulatory or safety training be required to complete the site survey?
D. Is access available to all areas of the customer facility where the WLAN is planned to be deployed?
E. Which types of controllers and switches will be required to fully conduct the site survey in all areas of
the customer facility?
F. Is access available to customer employees so that initial interviews can be performed?
Answer: A,C,D

Cisco   642-732   642-732자격증   642-732   642-732 pdf

NO.6 Which wireless tool would be most useful in planning a WLAN solution prior to performing a site
survey?
A. Ekahau Survey
B. Air Magnet Survey
C. Air Magnet Wi-Fi Analyzer
D. Cisco Spectrum Expert
E. Cisco WCS
Answer: E

Cisco최신덤프   642-732최신덤프   642-732   642-732 dump   642-732

NO.7 Which three statements describe WLAN RF interaction with environmental situations? (Choose three.)
A. Outdoor rain or indoor humidity affects diffraction.
B. Outdoor rain or indoor humidity affects attenuation.
C. RF frequency is inversely related to attenuation.
D. RF frequency is directly related to attenuation.
E. The human body affects diffusion.
F. The human body affects attenuation.
Answer: B,D,F

Cisco   642-732인증   642-732자격증   642-732   642-732

NO.8 An initial meeting has been scheduled for a proposed site survey of a customer headquarters location.
Which four types of information would be valuable to collect prior to the formal kickoff meeting? (Choose
four.)
A. Site type (urban, suburban, external environmental sensitivity, etc.)
B. Business type
C. Number of years in business
D. Number of customers
E. Products and services produced
F. Building type
G. Plans for branch expansion
H. Number of branch locations
Answer: A,B,E,F

Cisco인증   642-732덤프   642-732

NO.9 You have a multinational customer that would like you to perform a wireless site survey for a new
manufacturing facility in Singapore. They have had a local vendor install a point-to-point wireless bridge
link between two buildings 1 km apart. The ground between the buildings is flat but because facilities are
in the mountains, dense fog is an issue. There are no line of sight issues between the buildings. The link
is experiencing errors and throughput issues. Currently the two radios are set to operate at 2.4 GHz and
the transmit power is set to 7 dBm with 7 dBm antennas. What do you need to take into consideration
when performing the site survey for this link?
A. Change the radio power to 17 dBm.
B. Change the radio power to 20 dBm and replace with a 16 dBm antenna.
C. Change the radio power to 29 dBm.
D. Change the radio power to 13 dBm.
Answer: D

Cisco최신덤프   642-732인증   642-732자격증   642-732덤프   642-732

NO.10 Which option allows the maximum 2.4-GHz channel usage for a survey and data deployment in the
ETSI domain?
A. 1, 6, 11
B. 1, 5, 9, 13
C. 1, 6, 9, 14
D. 1, 6, 11, 14
Answer: B

Cisco dump   642-732   642-732

NO.11 What is the recommended method to protect a wireless outdoor bridge from lightning?
A. Install the wireless outdoor bridge in a grounded NEMA enclosure.
B. Install the wireless outdoor bridge inside a building if possible and only have the antenna outside.
C. Install a fiber-optic link between the wireless outdoor bridge and the antenna.
D. Install a one-meter segment of fiber-optic cable with a copper-to-fiber-optic transceiver to isolate the
wireless outdoor bridge from the network cable plant.
E. Install a protection frame in the copper portion of the network cable plant to act as a lighting arrestor.
Answer: D

Cisco   642-732   642-732 pdf   642-732

NO.12 The customer has an existing 802.11b/g network with Cisco 2500 controllers. The customer would like
to migrate to an 802.11a/b/g/n WLAN. Which network infrastructure issue might impact client performance
in this proposed controller-based solution?
A. The additional application load placed on servers by 802.11n clients.
B. A bottleneck may occur if the access switch port to the AP only supports 100 Mb/s full duplex.
C. The additional load placed on a RADIUS server by 802.1X authentication traffic on the first work day of
each week.
D. The added delay WDS imposes on the client when they roam from one AP to another.
Answer: B

Cisco   642-732   642-732

NO.13 When planning to perform a customer WLAN site survey, which three components and tasks should be
considered? (Choose three.)
A. Schedule a meeting with the customer to discuss the Statement of Work
B. Complete the Pre-Survey Customer Questionnaire
C. Schedule customer end user interviews
D. Consider travel, access, and equipment requirements necessary to perform the site survey
E. Schedule initial customer meeting and pre-survey walkthrough events
F. Determine radiospectrum and channel allocation
G. Determine AP and controller placement
H. Determinecustomer training requirements
Answer: B,D,E

Cisco   642-732 dump   642-732최신덤프   642-732   642-732시험문제

NO.14 Which two issues do access and backhaul radios experience in mesh networks? (Choose two.)
A. The access radio has to connect to two or several points.
B. The access cell usually covers more area at ground level that may have more sources of reflection and
interference.
C. The access cell radio range is larger than the backhaul radio range, which causes the backhaul cell
radio to suffer from more interference.
D. Backhaul radios are a bottleneck for throughput.
E. RAPs help MAPs avoid coverage holes.
Answer: B,D

Cisco pdf   642-732   642-732   642-732   642-732   642-732 dumps

NO.15 During the site survey kick-off meeting with your customer, they ask why you need to verify the existing
network infrastructure. Which two reasons do you give them? (Choose two.)
A. You need to verify the make, model, and software versions of all the equipment that will connect to the
WLAN components in order to ensure compatibility.
B. You need to verify that the equipment the WLAN components will connect to has sufficient memory
capacity to support the additional WLAN connections.
C. You need to verify that there are sufficient switch ports to support the new WLAN connections.
D. You need to verify that the switches the WLAN components will connect to can supply 802.3af inline
power, and that they have sufficient ports to support all the new WLAN devices.
E. Depending on the type of APs that are planned for, the deployment may require different types of PoE
to be supplied by the LAB switches.
Answer: C,D

Cisco dump   642-732   642-732

많은 시간과 정신력을 투자하고 모험으로Cisco인증642-732시험에 도전하시겠습니까? 아니면 우리ITExamDump 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 ITExamDump의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 ITExamDump선택함으로 여러분은 성공을 선택한 것입니다.