Microsoft 070-561 시험문제

우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Microsoft 070-561시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.

ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의Microsoft인증 070-561덤프는 이해하기 쉽고 모든Microsoft인증 070-561시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.

ITExamDump의Microsoft인증 070-561덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의Microsoft인증 070-561덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? Microsoft인증 070-561덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.

시험 번호/코드: 070-561
시험 이름: Microsoft (TS: MS .NET Framework 3.5, ADO.NET Application Development)

많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은Microsoft 070-561인증시험을 한번에 통과할 수 있습니다, ITExamDump에서Microsoft 070-561시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.

Microsoft인증 070-561시험을 패스하는 지름길은ITExamDump에서 연구제작한 Microsoft 인증070-561시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 Microsoft 인증070-561시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. Microsoft 인증070-561시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의Microsoft 인증070-561시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.

Microsoft인증 070-561시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 Microsoft인증 070-561덤프는Microsoft인증 070-561시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.

아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. ITExamDump의Microsoft인증 070-561덤프의 도움으로 Microsoft인증 070-561시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.

070-561 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-561.html

NO.1 {

NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim queryString As String = "Select Name, Age from dbo.Table_1"
Dim command As New _SqlCommand(queryString, DirectCast(connection, SqlConnection))
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. Dim value As Object = command.ExecuteScalar()
Dim requiredValue As String = value.ToString()
B. Dim value As Integer = command.ExecuteNonQuery()
Dim requiredValue As String = value.ToString()
C. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(0).ToString()
D. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(1).ToString()
Answer: A

Microsoft   070-561   070-561인증   070-561

NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string query = "Select EmpNo, EmpName from dbo.Table_1;
select Name,Age from dbo.Table_2";
SqlCommand command = new SqlCommand(query, connection);
SqlDataReader reader = command.ExecuteReader();
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.Read();
}
B. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.NextResult();
}
C. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.NextResult();
while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
D. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.Read();
while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
Answer: C

Microsoft시험문제   070-561   070-561   070-561   070-561

NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1";
SqlCommand command = new SqlCommand(queryString, (SqlConnection)connection));
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. var value = command.ExecuteScalar();
string requiredValue = value.ToString();
B. var value = command.ExecuteNonQuery();
string requiredValue = value.ToString();
C. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[0].ToString();
D. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[1].ToString();
Answer: A

Microsoft pdf   070-561   070-561자료   070-561 pdf   070-561자료

NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(connectionString)) {
02 SqlCommand cmd = new SqlCommand(queryString, connection);
03 connection.Open();
04
05 while (sdrdr.Read()){
06 // use the data in the reader
07 }
08 }
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. SqlDataReader sdrdr = cmd.ExecuteReader();
B. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.Default);
C. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SchemaOnly);
D. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SequentialAccess);
Answer: D

Microsoft   070-561덤프   070-561인증

NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub GetOrders(ByVal cn As SqlConnection)
02 Dim cmd As SqlCommand = cn.CreateCommand()
03 cmd.CommandText = "Select * from [Order]; " + _
"Select * from [OrderDetail];"
04 Dim da As New SqlDataAdapter(cmd)
05
06 End Sub
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS)
B. da.Fill(OrderDS.Order)
da.Fill(OrderDS.OrderDetail)
C. da.TableMappings.AddRange(New DataTableMapping() _
{New DataTableMapping("Table", "Order"), _
New DataTableMapping("Table1", "OrderDetail")})
da.Fill(OrderDS)
D. Dim mapOrder As New DataTableMapping()
mapOrder.DataSetTable = "Order"
Dim mapOrderDetail As New DataTableMapping()
mapOrder.DataSetTable = "OrderDetail"
da.TableMappings.AddRange(New DataTableMapping() _
{mapOrder, mapOrderDetail})
da.Fill(OrderDS)
Answer: C

Microsoft기출문제   070-561자료   070-561   070-561   070-561 dump

NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. Catch ex As System.Security.SecurityException
'Handle all database security related exceptions.
End Try
B. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).[Class].ToString() = "14" Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
C. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Number = 14 Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
D. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Message.Contains("Security") Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
Answer: B

Microsoft   070-561자격증   070-561자료   070-561인증   070-561   070-561 pdf

NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub FillOrderTable(ByVal pageIndex As Integer)
02 Dim pageSize As Integer = 5
03
04 End Sub
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, pageIndex, pageSize, "Order")
B. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, startRecord, pageSize, "Order")
C. Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, pageIndex)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
D. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, startRecord)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
Answer: B

Microsoft pdf   070-561   070-561최신덤프   070-561

NO.9 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal));
02
03 OrderDetailTable.Columns.Add(col);
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity";
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer: D

Microsoft dumps   070-561   070-561최신덤프   070-561 dumps

NO.10 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C

Microsoft최신덤프   070-561인증   070-561 pdf   070-561

NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 private void GetOrders(SqlDataConnection cn) {
02 SqlCommand cmd = cn.CreateCommand();
03 cmd.CommandText = "Select * from [Order];
Select * from [OrderDetail];";
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05
06 }
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS);
B. da.Fill(OrderDS.Order);
da.Fill(OrderDS.OrderDetail);
C. da.TableMappings.AddRange(new DataTableMapping[] {
new DataTableMapping("Table", "Order"),
new DataTableMapping("Table1", "OrderDetail")});
da.Fill(OrderDS);
D. DataTableMapping mapOrder = new DataTableMapping();
mapOrder.DataSetTable = "Order";
DataTableMapping mapOrderDetail = new DataTableMapping();
mapOrder.DataSetTable = "OrderDetail";
da.TableMappings.AddRange(new DataTableMapping[]
{ mapOrder, mapOrderDetail });
Da.Fill(OrderDS);
Answer: C

Microsoft   070-561 dump   070-561

NO.12 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Function GetProducts(ByVal cn _
As SqlConnection) As DataSet
02 Dim cmd As New SqlCommand()
03 cmd.Connection = cn
04 Dim da As New SqlDataAdapter(cmd)
05 Dim ds As New DataSet()
06
07 da.Fill(ds)
08 Return ds
09 End Function
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = _
String.Format("sp_sqlexec 'SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1'", _
txtProductID.Text)
B. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.Prepare()
C. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.CommandType = CommandType.TableDirect
D. cmd.CommandText = "SELECT ProductID, " + _
"Name FROM Product WHERE ProductID=@productID AND IsActive=1"
cmd.Parameters.AddWithValue("@productID", txtProductID.Text)
Answer: D

Microsoft   070-561   070-561   070-561 dumps   070-561인증   070-561

NO.13 }
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 16?
A. myReader = myCommand.ExecuteReader();
RecordCount = myReader.RecordsAffected;
B. while (myReader.Read())
{
//Write logic to process data for the first result.
}
RecordCount = myReader.RecordsAffected;
C. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
myReader.NextResult();
}
}
D. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
}
myReader.NextResult();
}
Answer: D

Microsoft   070-561   070-561 dump   070-561
22. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim myConnString As String = _
02 "User ID=<username>;password=<strong password>;" + _
03 "Initial Catalog=pubs;Data Source=myServer"
04 Dim myConnection As New SqlConnection(myConnString)
05 Dim myCommand As New SqlCommand()
06 Dim myReader As DbDataReader
07 myCommand.CommandType = CommandType.Text
08 myCommand.Connection = myConnection
09 myCommand.CommandText = _
10 "Select * from Table1;Select * from Table2;"
11 Dim RecordCount As Integer = 0
12 Try
13 myConnection.Open()
14
15 Catch ex As Exception
16 Finally
17 myConnection.Close()
18 End Try
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 14?
A. myReader = myCommand.ExecuteReader()
RecordCount = myReader.RecordsAffected
B. While myReader.Read()
'Write logic to process data for the first result.
End While
RecordCount = myReader.RecordsAffected
C. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
myReader.NextResult()
End While
End While
D. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
End While
myReader.NextResult()
End While
Answer: D

Microsoft dumps   070-561   070-561기출문제   070-561자료
23. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 private void LoadGrid()
02 {
03 using (SqlCommand command = new SqlCommand())
04 {
05 command.Connection = connection;
06 command.CommandText = "SELECT * FROM Customers";
07 connection.Open();
08
09 }
10 }
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 08?
A. SqlDataReader rdr = command.ExecuteReader();
connection.Close();
GridView1.DataSource = rdr;
GridView1.DataBind();
B. SqlDataReader rdr = command.ExecuteReader();
GridView1.DataSource = rdr.Read();
GridView1.DataBind();
connection.Close();
C. SqlDataReader rdr = command.ExecuteReader();
Object[] values = new Object[rdr.FieldCount];
GridView1.DataSource = rdr.GetValues(values);
GridView1.DataBind();
connection.Close();
D. DataTable dt = new DataTable();
using (SqlDataReader reader = command.ExecuteReader())
{
dt.Load(reader);
}
connection.Close();
GridView1.DataSource = dt;
GridView1.DataBind();
Answer: D

Microsoft기출문제   070-561 pdf   070-561   070-561   070-561   070-561 dump
24. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub LoadGrid()
02 Using command As New SqlCommand()
03 command.Connection = connection
04 command.CommandText = "SELECT * FROM Customers"
05 connection.Open()
06
07 End Using
08 End Sub
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 06?
A. Dim rdr As SqlDataReader = command.ExecuteReader()
connection.Close()
GridView1.DataSource = rdr
GridView1.DataBind()
B. Dim rdr As SqlDataReader = command.ExecuteReader()
GridView1.DataSource = rdr.Read()
GridView1.DataBind()
connection.Close()
C. Dim rdr As SqlDataReader = command.ExecuteReader()
Dim values As Object() = New Object(rdr.FieldCount - 1) {}
GridView1.DataSource = rdr.GetValues(values)
GridView1.DataBind()
D. Dim dt As New DataTable()
Using reader As SqlDataReader = command.ExecuteReader()
dt.Load(reader)
End Using
connection.Close()
GridView1.DataSource = dt
GridView1.DataBind()
Answer: D

Microsoft기출문제   070-561   070-561

NO.14 myConnection.Close();

NO.15 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. catch (System.Security.SecurityException ex)
{
//Handle all database security related exceptions.
}
B. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Class.ToString() == "14") {
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
C. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Number == 14){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
D. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Message.Contains("Security")){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
Answer: B

Microsoft   070-561   070-561덤프   070-561 dump   070-561기출문제

NO.16 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(sourceConnectionString))
02 using (SqlConnection connection2 = new
SqlConnection(destinationConnectionString))
03 using (SqlCommand command = new SqlCommand())
04 {
05 connection.Open();
06 connection2.Open();
07 using (SqlDataReader reader = command.ExecuteReader())
08 {
09 using (SqlBulkCopy bulkCopy = new
SqlBulkCopy(connection2))
10 {
11
12 }
13 }
14 }
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 11?
A. reader.Read()
bulkCopy.WriteToServer(reader);
B. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.WriteToServer(reader);
C. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.SqlRowsCopied += new
SqlRowsCopiedEventHandler(bulkCopy_SqlRowsCopied);
D. while (reader.Read())
{
bulkCopy.WriteToServer(reader);
}
Answer: B

Microsoft   070-561최신덤프   070-561

NO.17 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OdbcConnection(connectionString)
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OleDbConnection(connectionString)
C. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory("System.Data.Odbc")
Dim connection As DbConnection = _ factory.CreateConnection()
D. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory(databaseProviderName)
Dim connection As DbConnection = factory.CreateConnection()
Answer: D

Microsoft기출문제   070-561   070-561 dump   070-561시험문제

NO.18 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 private void FillOrderTable(int pageIndex) {
02 int pageSize = 5;
03
04 }
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, pageIndex, pageSize, "Order");
B. int startRecord = (pageIndex - 1) * pageSize;
string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, startRecord, pageSize, "Order");
C. string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}", pageSize, pageIndex);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
D. int startRecord = (pageIndex - 1) * pageSize;
string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}",
pageSize, startRecord);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
Answer: B

Microsoft   070-561기출문제   070-561

NO.19 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D

Microsoft   070-561   070-561   070-561   070-561 dumps

NO.20 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 private DataSet GetProducts(SqlConnection cn) {
02 SqlCommand cmd = new SqlCommand();
03 cmd.Connection = cn;
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05 DataSet ds = new DataSet();
06
07 da.Fill(ds);
08 return ds;
09 }
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = string.Format("sp_sqlexec 'SELECT ProductID,
Name FROM Product WHERE ProductID={0} AND IsActive=1'", txtProductID.Text);
B. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.Prepare();
C. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.CommandType = CommandType.TableDirect;
D. cmd.CommandText = "SELECT ProductID, Name FROM Product WHERE
ProductID=@productID AND IsActive=1";
cmd.Parameters.AddWithValue("@productID", txtProductID.Text);
Answer: D

Microsoft   070-561자격증   070-561   070-561

NO.21 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(connectionString)
02 Dim cmd As New SqlCommand(queryString, connection)
03 connection.Open()
04
05 While sdrdr.Read()
06 ' use the data in the reader
07 End While
08 End Using
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader()
B. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.[Default])
C. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SchemaOnly)
D. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SequentialAccess)
Answer: D

Microsoft자격증   070-561자격증   070-561   070-561시험문제   070-561

NO.22 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim query As String = _ "Select EmpNo, EmpName from dbo.Table_1; " + _ "select Name,Age from
dbo.Table_2"
Dim command As New SqlCommand(query, connection)
Dim reader As SqlDataReader = command.ExecuteReader()
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.Read()
End While
B. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.NextResult()
End While
C. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.NextResult()
while reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
D. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.Read()
while reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
Answer: C

Microsoft dumps   070-561   070-561 dump   070-561

NO.23 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
11 End Using
12 End Using
13 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B

Microsoft   070-561 dumps   070-561

NO.24 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 String myConnString = "User
02 ID=<username>;password=<strong password>;Initial
03 Catalog=pubs;Data Source=myServer";
04 SqlConnection myConnection = new
05 SqlConnection(myConnString);
06 SqlCommand myCommand = new SqlCommand();
07 DbDataReader myReader;
08 myCommand.CommandType =
09 CommandType.Text;
10 myCommand.Connection = myConnection;
11 myCommand.CommandText = "Select * from Table1;
Select * from Table2;";
12 int RecordCount = 0;
13 try
14 {
15 myConnection.Open();
16
17 }
18 catch (Exception ex)
19 {
20 }
21 finally

NO.25 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub ModifyDataAdapter()
02
03 End Sub
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
B. Dim cb As New SqlCommandBuilder(daOrder)
cb.SetAllValues = True
C. Dim cb As New SqlCommandBuilder(daOrder)
daOrder.DeleteCommand = cb.GetDeleteCommand()
daOrder.InsertCommand = cb.GetInsertCommand()
daOrder.UpdateCommand = cb.GetUpdateCommand()
D. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
cb.GetDeleteCommand()
cb.GetInsertCommand()
cb.GetUpdateCommand()
Answer: C

Microsoft인증   070-561   070-561 dump   070-561   070-561

NO.26 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 protected void UpdateData(SqlCommand cmd) {
02 cmd.Connection.Open();
03
04 lblResult.Text = "Updating ...";
05 }
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
int count = (int)ar.AsyncState;
LogResults(count);
}
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
SqlCommand cmd = (SqlCommand)ar.AsyncState;
int count = cmd.EndExecuteNonQuery(ar);
LogResults(count);
}
C. Insert the following code segment at line 03.
cmd.StatementCompleted += new
StatementCompletedEventHandler(UpdateComplete);
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete (object sender, StatementCompletedEventArgs e) {
int count = e.RecordCount;
LogResults(count);
}
D. Insert the following code segment at line 03.
SqlNotificationRequest notification = new
SqlNotificationRequest("UpdateComplete", "", 10000);
cmd.Notification = notification;
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete(SqlNotificationRequest notice) {
int count = int.Parse(notice.UserData);
LogResults(count);
}
Answer: B

Microsoft   070-561덤프   070-561

NO.27 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OdbcConnection(connectionString);
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OleDbConnection(connectionString);
C. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.Odbc");
DbConnection connection = factory.CreateConnection();
D. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory(databaseProviderName);
DbConnection connection = factory.CreateConnection();
Answer: D

Microsoft   070-561자격증   070-561자료   070-561덤프   070-561   070-561

NO.28 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 private void ModifyDataAdapter() {
02
03 }
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
B. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.SetAllValues = true;
C. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
daOrder.DeleteCommand = cb.GetDeleteCommand();
daOrder.InsertCommand = cb.GetInsertCommand();
daOrder.UpdateCommand = cb.GetUpdateCommand();
D. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
cb.GetDeleteCommand();
cb.GetInsertCommand();
cb.GetUpdateCommand();
Answer: C

Microsoft   070-561   070-561   070-561자료   070-561

NO.29 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. try
{
if(null!=conn)
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Open();
}
B. try
{
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Open();
}
C. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Close();
}
D. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Close();
}
Answer: C

Microsoft기출문제   070-561 pdf   070-561덤프

NO.30 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 Protected Sub UpdateData(ByVal cmd As SqlCommand)
02 cmd.Connection.Open()
03
04 lblResult.Text = "Updating ..."
05 End Sub
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete (ByVal ar As IAsyncResult)
Dim count As Integer = CInt(ar.AsyncState)
LogResults(count)
End Sub
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete(ByVal ar As IAsyncResult)
Dim cmd As SqlCommand = DirectCast(ar.AsyncState, SqlCommand)
Dim count As Integer = cmd.EndExecuteNonQuery(ar)
LogResults(count)
End Sub
C. Insert the following code segment at line 03.
AddHandler cmd.StatementCompleted, AddressOf UpdateComplete
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete(ByVal sender As Object, _
ByVal e As StatementCompletedEventArgs)
Dim count As Integer = e.RecordCount
LogResults(count)
End Sub
D. Insert the following code segment at line 03.
Dim notification As New _
SqlNotificationRequest("UpdateComplete ", "", 10000)
cmd.Notification = notification
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete (ByVal notice As SqlNotificationRequest)
Dim count As Integer = Integer.Parse(notice.UserData)
LogResults(count)
End Sub
Answer: B

Microsoft pdf   070-561   070-561   070-561   070-561   070-561

ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.