저희가 알아본 데 의하면 많은it인사들이Cisco인증642-691시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 ITExamDump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 ITExamDump에는Cisco인증642-691테스트버전과Cisco인증642-691문제와 답 두 가지 버전이 있습니다.우리는 여러분의Cisco인증642-691시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.
지금 같은 정보시대에, 많은 IT업체 등 사이트에Cisco 642-691인증관련 자료들이 제공되고 있습니다, 하지만 이런 사이트들도 정확하고 최신 시험자료 확보는 아주 어렵습니다. 그들의Cisco 642-691자료들은 아주 기본적인 것들뿐입니다. 전면적이지 못하여 응시자들의 관심을 쌓지 못합니다.
최근 Cisco인증 642-691시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고Cisco인증 642-691시험에 도전해보세요. ITExamDump 의 Cisco인증 642-691덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. Cisco인증 642-691덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.
Cisco인증 642-691시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Cisco인증 642-691덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Cisco 인증642-691시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Cisco 인증642-691시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.
시험 번호/코드: 642-691
시험 이름: Cisco (CCIP BGP + MPLS Exam (BGP + MPLS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2013-11-28
642-691 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-691.html
NO.1 What does the following command accomplish?
sanjose#clear ip bgp 10.1.1.1 in prefix-filter
A. The sanjose router will perform an outbound soft reconfig to the 10.1.1.1 neighbor.
B. The sanjose router will send out the ORF prefix-list so that a new route refresh will be received from the
1.1.1 neighbor.
C. The 10.1.1.1 router will perform an inbound soft reconfig on the updates from the sanjose neighbor.
D. The 10.1.1.1 router will send out the ORF prefix-list so that a new route refresh will be received from
the sanjose neighbor.
E. The bgp session between the sanjose and the 10.1.1.1 router will be reset so that all the new bgp
updates from the 10.1.1.1 router can be processed by the inbound prefix-list at the sanjose router.
F. The bgp session between the sanjose and the 10.1.1.1 router will be reset so that all the new bgp
updates from the sanjose router can be processed by the inbound prefix-list at the 10.1.1.1 router.
Answer: B
Cisco기출문제 642-691시험문제 642-691 pdf 642-691 642-691 dump
NO.2 In a central services topology, which routes do client VRFs contain?
A. routes from the client site, but not from the server site
B. routes from the server site, but not from the client site
C. routes from both the client site and the server site
D. only EBGP routes from either the client site or the server site
Answer: C
Cisco 642-691자료 642-691기출문제 642-691 pdf
NO.3 What are three drawbacks of a peer-to-peer VPN using a shared provider edge (PE) router? (Choose
three.)
A. A full mesh of virtual circuits is required between the customer sites.
B. All the customers have to share a common IP address space.
C. Optimal routing between customer sites cannot be guaranteed.
D. The shared PE router has to know all routes for all customers.
E. Packet filters are required on the PE routers.
Answer: BDE
Cisco인증 642-691 dump 642-691 dumps 642-691 642-691인증 642-691
NO.4 Refer to the diagram.
What problem can be caused by the second P router summarizing the loopback address of the egress PE
router.?
A. The first P router will be faced with a VPN label which it does not understand.
B. The second P router will be faced with a VPN label which it does not understand.
C. The egress PE router will not be able to establish a label switch path (LSP) to the ingress PE router.
D. A label switch path (LSP) will be established from the ingress PE router to the egress PE router, an
event that is not desirable.
E. The ingress PE router will not be able to receive the VPN label from the egress PE router via MP-IBGP.
Answer: B
Cisco 642-691 dump 642-691
NO.5 Refer to the exhibit.
\Which two of the following statements about the MPLS configurations are true? (Choose two.)
A. The VPI range being configured is the default VPI range.
B. The router is missing the mpls label protocol ldp configuration command on its ATM 0/0.1 subinterface
to make it an LC-ATM enabled subinterface.
C. There is a problem with the configurations because the control VC should be set to 0 32 instead.
D. The ATM switch is using VC merge since VC merge is enabled by default.
E. For MPLS label allocations, both VPI 6 and 7 can be used.
Answer: DE
Cisco기출문제 642-691 dumps 642-691인증 642-691
NO.6 Which two of the following statements regarding LDP are true? (Choose two.)
A. LDP can also be used between nonadjacent routers using multicast LDP hello messages.
B. LDP does not require periodic hello messages once the LDP session has been established between
the LDP peers.
C. LDP hello messages use TCP packets with a destination port number of 646.
D. Multiple sessions can be established between a pair of LSRs if they use multiple label spaces.
E. Per-platform label space can be identified by a label space ID of 0 in the LDP identifier field.
Answer: DE
Cisco 642-691 642-691 642-691 642-691 dump
NO.7 Based on the topology diagram shown in the exhibit, when should BGP be used as the routing protocol
between the customer and the ISP?
A. If physical link failures can not be detected by the link-level procedures.
B. If the customer wants to affect how the ISP will route the customer's traffic out to the rest of the Internet.
C. If the ISP does not support static routing with the customer.
D. If the customer is using provider-assigned (PA) addresses inside the customer's network.
E. If the customer is using private addresses inside the customer's network.
Answer: A
Cisco 642-691 dump 642-691인증 642-691자료
NO.8 Based on the network diagram shown in the exhibit, what is the correct configuration on the customer
edge router used to conditionally announce the customer networks to the ISP?
A. router bgp 65001
! neighbor commands not shown
network 192.168.8.0 mask 255.255.252.0
!
ip route 192.168.8.0 255.255.252.0 192.168.8.33
B. router bgp 65001
! neighbor commands not shown
aggregate-address 192.168.8.0 255.255.252.0 summary-only
!
ip route 192.168.8.0 255.255.252.0 192.168.8.33
C. router bgp 65001
! neighbor commands not shown
network 192.168.8.0
network 192.168.9.0
network 192.168.10.0
network 192.168.11.0
!
ip route 192.168.8.0 255.255.255.0 null0
ip route 192.168.9.0 255.255.255.0 null0
ip route 192.168.10.0 255.255.255.0 null0
ip route 192.168.11.0 255.255.255.0 null0
D. router bgp 65001
! neighbor commands not shown
aggregate-address 192.168.8.0 255.255.252.0 summary-only
!
router ospf 1
network 192.168.8.0 0.0.3.255 area 0
E. router bgp 65001
! neighbor commands not shown
aggregate-address 192.168.8.0 255.255.252.0
!
ip route 192.168.8.0 255.255.252.0 null0
Answer: A
Cisco덤프 642-691기출문제 642-691
NO.9 On a dedicated subinterface implementation, PE-2 must establish an address-family vrf IPv4 BGP
neighbor relationship with which router?
A. CE-1
B. CE-2
C. PE-1
D. PE-IG
E. CE-1 and CE-2
F. PE-1 and PE-IG
Answer: B
Cisco 642-691 642-691
NO.10 For which purpose is the command mpls ldp maxhops used?
A. In large ATM-MPLS networks, the LFIB can become too large and it may be necessary to limit the
maximum diameter of the MPLS LSPs.
B. Because downstream-on-demand label allocation uses hop count to control loop detection, it maybe
necessary to limit the maximum diameter of the MPLS network.
C. Because end-to-end delay can cause problems with some voice applications, it may be necessary to
limit the maximum diameter of the MPLS network.
D. When interconnecting large frame mode MPLS and cell mode networks it may be necessary to limit the
maximum network diameter to prevent forwarding loops.
Answer: B
Cisco dump 642-691 pdf 642-691 642-691
ITexamdump의 MB2-866덤프의 VCE테스트프로그램과 E20-385덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-N35시험에 대비한 고품질 덤프와 C_TSCM62_65시험 최신버전덤프를 제공해드립니다. 최고품질 NS0-155시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기