안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Oracle 1Z0-054인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Oracle 1Z0-054문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Oracle 1Z0-054인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.
ITExamDump는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. Oracle인증 1Z0-054시험을 등록하신 분들은 바로ITExamDump의Oracle인증 1Z0-054덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.
저희가 알아본 데 의하면 많은it인사들이Oracle인증1Z0-054시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 ITExamDump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 ITExamDump에는Oracle인증1Z0-054테스트버전과Oracle인증1Z0-054문제와 답 두 가지 버전이 있습니다.우리는 여러분의Oracle인증1Z0-054시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.
ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. Oracle인증 1Z0-054시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의Oracle인증 1Z0-054덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.
Oracle인증 1Z0-054시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 Oracle인증 1Z0-054덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여Oracle인증 1Z0-054시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.
시험 번호/코드: 1Z0-054
시험 이름: Oracle (Oracle Database 11g: Performance Tuning)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 192 문항
업데이트: 2014-02-23
1Z0-054 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-054.html
NO.1 After running SQL Performance Analyzer (SPA), you observe a few regressed SQL statements in the
SPA output. Identify the two actions that you would suggest for these regressed SQL statements.
(Choose two.)
A.Running SQL Access Advisor
B.Adding them to SQL Plan Baseline
C.Submitting them to SQL Tuning Advisor
D.Running Automatic Database Diagnostic Monitor (ADDM)
ANSWER: BC
Oracle pdf 1Z0-054 1Z0-054 1Z0-054 1Z0-054
NO.2 You are working on a development database that was upgraded to Oracle Database 11g from Oracle
Database 9i. An ADDM finding in this database says that the shared pool is inadequately sized, as shown
in the Exhibit.
You diagnosed that this is due to different kinds of workloads and this occurs only during peak hours. You
tried to resize this by shrinking the database buffer cache but that caused inadequate buffer cache
problems. The following are the related parameter settings:
SQL> show parameter sga
NAME TYPE VALUE
------------------------------ --------------- -----------------
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 300M
sga_target big integer 0
SQL> show parameter target
NAME TYPE VALUE
------------------------------ --------------- -----------------
.....
fast_start_mttr_target integer 0
memory_max_target big integer 0
memory_target big integer 0
pga_aggregate_target big integer 100M
sga_target big integer 0
You want to balance the memory between the System Global Area (SGA) components within SGA
without affecting the size of the Program Global Area (PGA).
Which action would solve this problem?
A. Set the SGA_TARGET parameter to 300M.
B. Set the SGA_MAX_SIZE parameter to 400M.
C. Set the MEMORY_TARGET parameter to 100M.
D. Set the MEMORY_MAX_TARGET parameter to 300M.
ANSWER: A
Oracle자료 1Z0-054 pdf 1Z0-054 1Z0-054인증 1Z0-054최신덤프
NO.3 The columns CUST_CITY, CUST_STATE_PROVINCE, and COUNTRY_ID are frequently used
together in the WHERE clause of the queries. The CUSTOMERS table is a big table with 20 GB of data.
You notice that the selectivity for these three columns varies from the selectivity that the optimizer
calculates.
What would you recommend to influence the selectivity calculated by the optimizer?
A. creating function-based indexes by concatenating all the columns
B. updating histogram statistics for these columns by using the DBMS_STATS.GATHER_TABLE_STATS
procedure
C. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and create
index on the virtual column
D. using the DBMS_STATS.CREATE_EXTENDED_STATS function to create a virtual column and the
DBMS_STATS.GATHER_TABLE_STATS procedure to collect statistics on the virtual column
ANSWER: D
Oracle덤프 1Z0-054인증 1Z0-054기출문제
NO.4 A user in a session executed the following SQL statement to set the optimizer mode:
ALTER SESSION SET OPTIMIZER_MODE = ALL_ROWS
What impact would it have on the goal of the optimizer for that session? (Choose all that apply.)
A. Statement level OPTIMIZER_MODE hints take precedence over the session-level setting.
B. The OPTIMIZER_MODE parameter set at instance level takes precedence over the session-level
value.
C. The optimizer uses a cost-based approach, regardless of the presence of statistics; it optimizes with a
goal of best response time.
D. The optimizer uses a cost-based approach for all SQL statements in the session, regardless of the
presence of statistics; it optimizes with a goal of best throughput.
ANSWER: AD
Oracle 1Z0-054자료 1Z0-054자료 1Z0-054최신덤프
NO.5 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
You notice that the one of the queries is using a full table scan (view Exhibit1) instead of index unique
scan (view Exhibit2). The index is present on the column that is accessed in the WHERE clause of the
query. The cost for a full table scan is more than that for an index unique scan.
Why would the optimizer choose full table scan over index unique scan? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a low value.
B. The OPTIMIZER_INDEX_COST_ADJ initialization parameter is set to a high value.
C. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a low value.
D. The statistics for the table and all the indexes associated with the table are not current.
ANSWER: BD
Oracle 1Z0-054 dumps 1Z0-054
NO.6 You are working on a decision support system (DSS). The index is available on the COUNTRY_ID
column of the CUSTOMERS table.
View the Exhibit and examine the parameter settings and the query execution plan.
Why is the query using a full table scan instead of an index scan?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the index statistics for the index on the COUNTRY_ID column are not current
C. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a higher value
D. because the optimizer predicts that most of the blocks in the table are accessed. Therefore, it uses a
full table scan, even though indexes are available.
ANSWER: D
Oracle dumps 1Z0-054 pdf 1Z0-054 1Z0-054 dumps
NO.7 You plan to use adaptive thresholds as part of the performance tuning activity. You decide to increase
the window size of the default moving window baseline for all metric observations and comparisons in
your database. The following error occurs when you try to increase the window size through Enterprise
Manager:
Failed to commit: ORA-13541: system moving window baseline size (1296000) greater than retention
(1036800) ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 601 ORA-06512: at line 2
Which action would allow you to perform the preceding task successfully?
A. increasing the flashback retention period
B. increasing the retention period for SQL Management Base
C. increasing the undo retention period for the database instance
D. increasing the Automatic Workload Repository (AWR) retention period
ANSWER: D
Oracle자격증 1Z0-054 1Z0-054최신덤프 1Z0-054 dumps
NO.8 Examine the initialization parameter values for the instance given below:
NAME TYPE VALUE
------------------------------------ ----------- ------------------
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.6
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
db_file_multiblock_read_count integer 64
The index created on the column used in the WHERE clause of the query. You notice that the query is not
using the index. Instead of an index scan, a full table scan is used.
View the Exhibit and examine the autotrace output for a query.
What could be the reason for it? (Choose all that apply.)
A. The OPTIMIZER_INDEX_COST_ADJ initialization parameter has a low value.
B. The DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter has a low value.
C. The statistics for the table and all the indexes associated with the table are not current.
D. The table has less than DB_FILE_MULTIBLOCK_READ_COUNT blocks under the high-water mark.
ANSWER: CD
Oracle 1Z0-054 1Z0-054자료
NO.9 You are working on an online transaction processing (OLTP) system. You detected free buffer waits
events for your database instance running in a machine that has multiple CPUs. You increased the
database buffer cache size as the first step. After a few hours of work on the database, further
investigation shows that the same event is being recorded.
What would be your next step to avoid this event in future?
A. Decrease the value of the DBWR_IO_SLAVES parameter.
B. Set the USE_INDIRECT_DATA_BUFFERS parameter to TRUE.
C. Increase the value of the DB_WRITER_PROCESSES parameter.
D. Increase the value of the DB_FILE_MULTIBLOCK_READ_COUNT parameter.
ANSWER: C
Oracle 1Z0-054인증 1Z0-054 1Z0-054기출문제 1Z0-054인증
NO.10 You observed that some of the queries are performing poorly on the SALES_RECORDS table in your
database.
On further investigation, you find that at the end of each day the contents of the SALES_RECORDS table
are transferred to the SALES table and deleted from the SALES_RECORDS table. The deleted
operations cause the table to be sparsely populated.
You decided to use the ALTER TABLE...SHRINK SPACE COMPACT command to shrink the table.
Why would you choose this method? (Choose all that apply.)
A. because it can be used during peak hours
B. because it avoids unnecessary cursor invalidation
C. because it adjusts the high-water mark (HWM) immediately
D. because you have long-running queries that might span the shrink operation
E. because it does not allow any data manipulation language (DML) operations, thereby making the
shrink
operation faster
ANSWER: ABD
Oracle dump 1Z0-054 1Z0-054 dumps 1Z0-054최신덤프 1Z0-054최신덤프
NO.11 You are working on an online transaction processing (OLTP) system. By day most of the application
users perform queries accessing the most recently added or modified rows. The applications have most
of the queries based on multiple tables. But at night, some batch processing is also done.
Which two actions would you recommend to choose a goal for the optimizer based on the needs of your
application? (Choose two.)
A.setting the OPTIMIZER_MODE parameter to ALL_ROWS at the instance level
B.setting the OPTIMIZER_MODE parameter to FIRST_ROWS_n at the instance level
C.asking the developer to add a hint /*ALL_ROWS*/ in the long-running batch processing queries
D.asking the developer to add a hint /*FIRST_ROWS_n*/ in the long-running batch processing queries
ANSWER: BC
Oracle 1Z0-054 dumps 1Z0-054 1Z0-054 1Z0-054 dumps
NO.12 View Exhibit1 and examine the indexes on the CUSTOMERS table.
The statistics for the CUSTOMERS table have been updated recently by using the following command:
SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS('SH','CUSTOMERS',method_opt=>'FOR ALL
INDEXED COLUMNS SIZE AUTO');
View Exhibit2 to examine a query plan. Even though the index is present on the COUNTRY_ID and
CUST_GENDER columns, the query uses a full table scan. What could be the reason?
A. because the histogram statistics for the COUNTRY_ID column are not updated
B. because the DB_FILE_MULTIBLOCK_READ_COUNT initialization parameter is set to a high value
C. because the optimizer calculates the cost of accessing blocks by using a full table scan to be less as
compared to index scans, even though indexes are available
D. because indexes on CUST_GENDER and COUNTRY_ID columns are of different types, the index on
the CUST_GENDER column is bitmap index, and on COUNTRY_ID columns is btree index.
ANSWER: C
Oracle 1Z0-054최신덤프 1Z0-054덤프
NO.13 View Exhibit1 to examine the description of the CUSTOMERS table.
You observed that optimizer selectivity is not accurate when the CUST_STATE_PROVINCE and
COUNTRY_ID columns are used together in the WHERE clause of a query.
View Exhibit2 to examine the query execution plan and the commands executed to gather the statistics.
The optimizer predicts that 20 rows will be processed rather than the 3,341 rows, which is the actual
number of rows returned from the table.
What can you do to make the optimizer detect the actual number of rows?
A. Set the STATISTICS_LEVEL parameter to ALL.
B. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
C. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
D. Increase the STALE_PERCENT value for the CUSTOMERS table by using the
DBMS_STATS.SET_TABLE_PREFS procedure.
ANSWER: C
Oracle자료 1Z0-054 1Z0-054덤프 1Z0-054 dump
NO.14 View the Exhibit exhibit1 to examine the series of SQL commands and parameter settings.
View the Exhibit exhibit2 to examine the plans available in the SQL plan baseline.
The first plan (in red) is created when OPTIMIZER_MODE is set to ALL_ROWS and the second plan (in
blue) is created when OPTIMIZER_MODE is set to FIRST_ROWS.
Which SQL plan baseline would be used if the SQL query in exhibit1 is executed again when the value of
OPTIMIZER_MODE is set to FIRST_ROWS?
A. the second plan, because it is a fixed plan
B. the first plan, because it is an accepted plan
C. the second plan, because it is the latest generated plan in FIRST_ROW mode
D. A new plan, because the second plan in FIRST_ROW mode is not an accepted plan
ANSWER: B
Oracle 1Z0-054 1Z0-054최신덤프 1Z0-054자료 1Z0-054덤프
NO.15 Which three factors influence the optimizer's behavior while choosing an optimization approach and
goal for a SQL statement? (Choose three.)
A.parsing of a SQL statement
B.operating system (OS) statistics
C.object statistics in the data dictionary
D.the OPTIMIZER_MODE initialization parameter
E.optimizer SQL hints for changing the query optimizer goal
ANSWER: CDE
Oracle dump 1Z0-054 1Z0-054 1Z0-054
NO.16 View Exhibit1 to examine the description of the CUSTOMERS table.
The CUSTOMERS table has been updated heavily today. In a frequently used SQL statement, you notice
that estimated rows and the actual number of rows fetched differ greatly. The COUNTRY_ID column has
an index.
View Exhibit2 and examine the query execution plan.
What would you recommend to improve the optimizer's estimation?
A. setting the STATISTICS_LEVEL parameter to ALL
B. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE
C. creating extended statistics for the CUST_LAST_NAME, CUST_ID, and CUST_TOTAL columns
D. updating the statistics for the CUSTOMERS table by using the
DBMS_STATS.GATHER_TABLE_STATS
procedure
ANSWER: D
Oracle 1Z0-054 1Z0-054자격증
NO.17 View the Exhibit and examine a portion of the output obtained from the following query:
SQL> SELECT * FROM v$sys_time_model;
Select three correct interpretations of the time model statistics. (Choose three.)
A. DB time includes the wait time of all the nonidle and idle user sessions.
B. SQL execute elapsed time includes the time spent in performing fetches of query results.
C. DB CPU includes the CPU time spent on database user-level calls and background CPU time.
D. SQL execute elapsed time includes components of the hard parse elapsed time like bind elapsed time.
E. DB time includes the connection management call elapsed time excluding the background process
time.
ANSWER: BDE
Oracle 1Z0-054 1Z0-054 dumps 1Z0-054 1Z0-054 dumps
NO.18 You work as a DBA for a company and you have the responsibility of managing one of its online
transaction processing (OLTP) systems. The database encountered performance-related problems and
you generated an Automatic Workload Repository (AWR) report to investigate it further.
View the Exhibits and examine the AWR report.
What could be the problem in this database?
A.Java pool is not configured.
B.The CPU in the system is slow.
C.The shared pool size is inadequate.
D.The database buffer cache is inadequate.
E.The OPEN_CURSORS parameter is set to a small value.
ANSWER: C
Oracle 1Z0-054 1Z0-054자격증 1Z0-054시험문제 1Z0-054 1Z0-054
NO.19 A batch workload that historically completed in the maintenance window between 10:00 PM and
midnight is currently showing poor performance and completing at 2 AM.
To help in the diagnosis of the performance degradation, the senior DBA in your organization asks you to
execute the awrddrpt.sql script to produce a Compare Periods report.
Which two statements are true about the report produced by this script? (Choose two.)
A. It is refreshed automatically based on the moving window baseline.
B. It compares details between any two selected time periods of the same duration.
C. It normalizes the statistics by the amount of time spent on the database for each time period.
D. It compares details between two consecutive time periods of the same or different durations and is
refreshed every 60 minutes.
ANSWER: BC
Oracle자격증 1Z0-054 1Z0-054 1Z0-054
NO.20 Identify two correct statements about the Active Session History (ASH) data. (Choose two.)
A.A part of SGA memory is used to store ASH data as rolling buffer.
B.The ASH data can be analyzed between any two small time intervals.
C.All ASH data in memory are flushed to disk by MMON in every 3 seconds.
D.All ASH data in memory are flushed to disk by MMNL process whenever the buffer is full.
ANSWER: AB
Oracle dump 1Z0-054 1Z0-054 1Z0-054 1Z0-054 pdf 1Z0-054
ITexamdump의 1Z0-060덤프의 VCE테스트프로그램과 MB6-889덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-503시험에 대비한 고품질 덤프와 70-461시험 최신버전덤프를 제공해드립니다. 최고품질 CAT-500시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기