ITExamDump 는 완전히 여러분이 인증시험준비와 안전이 시험패스를 위한 완벽한 덤프제공사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 제품의 완성도도 다릅니다.그 말은 즉 알 맞춤 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편안하게 패스할 수 있습니다.많은 it인증관연 응시자들은 모두 우리ITExamDump가 제공하는 문제와 답 덤프로 자격증 취득을 했습니다.때문에 우리ITExamDump또한 업계에서 아주 좋은 이미지를 가지고 잇습니다
ITExamDump에서는EMC 인증E20-822시험대비덤프를 발췌하여 제공해드립니다. EMC 인증E20-822시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인EMC 인증E20-822시험대비덤프로EMC 인증E20-822시험준비공부를 해보세요. 통과율이 100%입니다.
ITExamDump의 연구팀에서는EMC E20-822인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드EMC E20-822덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에EMC E20-822이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이EMC E20-822시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.
EMC인증 E20-822시험준비중이신 분들은EMC인증 E20-822시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
시험 번호/코드: E20-822
시험 이름: EMC (CLARiiON Solutions Expert Exam for Storage Administrators)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-04-03
현재 많은 IT인사들이 같은 생각하고 잇습니다. 그것은 바로EMC E20-822인증시험자격증 취득으로 하여 IT업계의 아주 중요한 한걸음이라고 말입니다.그만큼EMC E20-822인증시험의 인기는 말 그대로 하늘을 찌르고 잇습니다,
ITExamDump의 EMC 인증 E20-822시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. EMC 인증 E20-822덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.
EMC인증 E20-822시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 EMC인증 E20-822덤프를 알고 계시는지요? ITExamDump 의 EMC인증 E20-822덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
E20-822 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-822.html
NO.1 Click the Exhibit button.
A failure has occurred in a DR environment. The error message is displayed in the exhibit. What must be
done to correct the failure?
A.Add more LUNs to the remote CLARiiON RLP. Restart the synchronization.
B.Destroy the mirror. Add a secondary of the correct size.
C.Enable write cache on the remote CLARiiON Write Intent Logs. Restart the synchronization.
D.Increase the write cache size on the remote CLARiiON.
Answer: A
EMC E20-822자격증 E20-822 dumps E20-822
NO.2 Click the Exhibit button.
A storage administrator is automating a solution using the Navisphere Secure CLI. In the event of
production data corruption, the script needs to recover from the target LUNs.
Which steps should the script perform?
P = Primary
S = Secondary
Snap = Snapshot
A.Unmount P, fracture, roll back Snap, synchronize, promote P, and mount P
B.Unmount P, promote S, fracture, roll back Snap, synchronize, promote P, and mount P
C.Unmount P, roll back Snap, promote S, fracture, synchronize, promote P, and mount P
D.Unmount P, roll back Snap, restore S, and mount P
Answer: B
EMC시험문제 E20-822 dumps E20-822 E20-822 E20-822 E20-822자료
NO.3 A customer has a single RAID group with a RAID 1/0 6+6 LUN on a dedicated DAE2. This LUN is
active on SP A. They need to expand with the maximum possible increase in IOPS. The LUN may not go
offline. The customer has a new DAE2 with the same disks.
How should they proceed?
A.Add 12 disks to the current RAID group. Create a new LUN. Create a striped metaLUN.
B.Back up the current LUN. Create a new RAID group and a new LUN on SP B. Present it to the host and
create a LVM plaid. Restore the data.
C.Create a new RAID group and create a new LUN on SP A. Create a concatenated metaLUN.
D.Create a new RAID group and create a new LUN on SP A. Create a striped metaLUN.
Answer: D
EMC E20-822 E20-822시험문제 E20-822
NO.4 A customer has recently upgraded their CLARiiON to FLARE R26. What software and configuration
changes must the storage administrator ensure are in place to take advantage of the Asymmetric
Active/Active features of the software?
A.PowerPath 5.0; and change all initiators to use Failover mode 2
B.PowerPath 5.0; disable ArrayCommPath, and change all initiators to use Failover mode 4
C.PowerPath 5.1; and change all initiators to use Failover mode 4
D.PowerPath 5.1; disable Array CommPath, and change all host initiators to use Failover mode 3
Answer: C
EMC자격증 E20-822 dumps E20-822덤프 E20-822 dump E20-822덤프
NO.5 A customer has configured SnapView for two LUNs on a DR CLARiiON storage system. When the
client attempts to run the Navisphere Secure CLI command to create the snapshot session, it fails.
In the setup process for using SnapView, which step did the customer forget to do?
A.Allocate LUNs to the Reserved LUN Pool
B.Allocate Write Intent Log
C.Enable Incremental Synchronization
D.Test IP link latency
Answer: A
EMC pdf E20-822 dumps E20-822 dump E20-822 E20-822
NO.6 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC E20-822자격증 E20-822 E20-822
NO.7 Click the Exhibit button.
A customer uses multiple server preparation scripts; one for new Exchange servers and one for recovery.
These scripts are used to configure the CLARiiON storage using the Navisphere Secure CLI. The
customer calls and reports that they accidentally ran the new server preparation script instead of the
recovery script they intended to run.
The customer asks for a check to see if their data is still available from CLARiiON storage as they cannot
find their LUNs. The CLARiiON SP event logs show the data in the exhibit. Which method can the
customer use to correct the problem?
A.Rebind base and component LUNs, reform the metaLUN, place the metaLUN in SG for the host, and
recover the data from the backup.
B.Reform the metaLUN from the original base and component LUNs, place the metaLUN in SG for the
host, and recover the data from the backup.
C.Use CLARiiON recovery tools to recover the metaLUN, place the metaLUN in SG for the host, and
recover the data from the backup.
D.Use Navisphere Secure CLI tools to recover base and component LUNs, reform the metaLUN, and
place the metaLUN in SG for the host.
Answer: A
EMC E20-822 dumps E20-822 E20-822 E20-822
NO.8 Click the Exhibit button.
What is true of LUN 3?
A.Disk crossings are excessively high
B.Disk utilization is above the best practices threshold
C.The host data is misaligned
D.The number of stripe crossings indicates a large I/O size
Answer: C
EMC E20-822자료 E20-822기출문제 E20-822 E20-822덤프
NO.9 A customer uses Incremental SAN Copy (ISC) as part of a DR solution. They have configured the
Reserved LUN Pool (RLP). They are adapting their environment to support different failure scenarios.
Which combination of failures is most serious?
A.A failure of the ISC update followed by a failure of the production LUN
B.A failure of the ISC update followed by a failure of the remote LUN
C.A failure of the link followed by a failure of the remote RLP
D.A failure of the RLP on the remote CLARiiON followed by a failure of the remote LUN
Answer: A
EMC E20-822 E20-822 pdf E20-822
NO.10 A customer created two RAID groups, 0 and 2, with the default settings on their CX3-80 and bound
four LUNs in each group. After starting the application the customer notices all I/O is going through SP B.
What caused the LUN imbalance?
A.CX3-80 has a single SP
B.Default setting bound all LUNs on the same SP
C.Host does not have failover software installed
D.Host is not ALUA-aware
Answer: B
EMC최신덤프 E20-822 E20-822인증
NO.11 Click the Exhibit button.
You are the SAN Administrator at a company. The company is running multiple Exchange Server 2007
storage groups on a CLARiiON array that exclusively uses 15k rpm 146 GB drives. You have been tasked
with adding a third Exchange storage group with one mailbox store to the existing server.
The storage for this new Exchange storage group must be allocated from the same CLARiiON currently
running the other two Exchange storage groups. All Exchange storage groups are presently exhibiting a
1:1 read/write ratio. The new storage group will require capacity identical to the existing Exchange
storage groups.
The table below, as well as the exhibit, indicates the current utilization of the array.w`V6a2tYJ%&,*In
order to satisfy the capacity requirements (GB and IOPS), in which RAID group must you create a
database LUN for the new Exchange storage group?
A.0
B.10
C.20
D.30b
Answer: C
EMC dump E20-822인증 E20-822 E20-822 E20-822 dumps
NO.12 Click the Exhibit button.
Based on the exhibit, what happened between 05:21 A.M. and 06:56 A.M.?
A.CLARiiON back-end port was disconnected
B.CLARiiON front-end port was disconnected
C.MirrorView connection failed
D.SAN Copy connection failed
Answer: C
EMC인증 E20-822 E20-822최신덤프
NO.13 A customer created two RAID groups, 0 and 2, with the default settings on their CX3-80 and bound
four LUNs in each group. After starting the application the customer notices all I/O is going through SP B.
What caused the LUN imbalance?
A.CX3-80 has a single SP
B.Default setting bound all LUNs on the same SP
C.Host does not have failover software installed
D.Host is not ALUA-aware
Answer: B
EMC E20-822시험문제 E20-822인증 E20-822인증
NO.14 A customer is reporting a problem with a physical disk. Examining the SP Event Log shows errors for
LUN 16. Data is being gathered from a UNIX host used for storage management. The host does not have
the capability to run the Navisphere Web UI.
To determine the underlying disk structure, which Navisphere Secure CLI subcommand can be used to
determine if LUN 16 is being affected?
A.getdisk
B.getinfo
C.getlun
D.getrg
Answer: C
EMC pdf E20-822 E20-822 dumps E20-822 E20-822 dumps
NO.15 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC pdf E20-822인증 E20-822자격증 E20-822 E20-822 E20-822
NO.16 A customer is currently using Replication Manager to create clone copies of their SQL Server instance
which are then mounted to a backup server and streamed to tape. The customer has decided to purchase
a second CLARiiON and implement a DR scenario. The DR site is located 30 km away. A dedicated T1
(1.5 Mb) line is leased specifically for DR purposes with measured latencies that average 5-10 ms.
The application is considered mission-critical and as such very little data loss is acceptable. Any solution
implemented must have very little impact on performance. Time will be allowed for the application to be
recovered in the case of a disaster. The implemented solution must also allow for transaction logs to be
replayed in the case of data corruption.
Which DR solution would best fit this scenario?
A.MirrorView/A
B.RepliStor SQL Server Module
C.SQL Log Shipping/Full SAN Copy from the production LUN
D.SQL Log Shipping/Incremental SAN Copy from the production LUN
Answer: C
EMC E20-822시험문제 E20-822덤프 E20-822 pdf
NO.17 A customer has been tasked with copying 50 LUNs between two CLARiiONs using SAN Copy. The
customer starts the sessions selecting all defaults. The resulting copies appear to be taking an
unexpectedly long time.
Which settings should be increased to improve performance?
A.Reserved LUN Pool Size, Concurrent sessions
B.Throttle Value, Concurrent sessions
C.Throttle Value, Reserved LUN Pool Size
D.Write cache, Reserved LUN Pool
Answer: B
EMC E20-822 dumps E20-822최신덤프 E20-822
NO.18 A large warehousing company has two CLARiiONs with two LUNs set up and each is mirrored with
MirrorView/A over DWDM. The two sites are less than 1 km away.
The company is currently running an OLTP database on a 300 GB RAID 1/0 4+4 LUN and its logging on a
150 GB RAID 1/0 4+4 LUN. The I/O read/write ratio is 2:1 with a 2 kB average I/O size.
The customer notices that at peak times the latency becomes an issue as their users start to complain
about poor performance. What is your recommendation?
A.Check the fibre for faults
B.Upgrade the CLARiiON model
C.Use Incremental SAN Copy
D.Use MirrorView/S
Answer: D
EMC E20-822덤프 E20-822 dump
NO.19 A new CLARiiON arrives at a customer's site and an EMC Customer Engineer performs the physical
installation. The storage administrator is under a lot of pressure to have the array online and in production
by the end of the week. The storage administrator selects several Windows and Solaris servers for the
initial production rollout. The storage requirements have been agreed upon and the storage administrator
creates 30 LUNs of various sizes based upon EMC best practices.
The administrator works with the server team to install HBAs, update settings, install EMC software, and
then perform the necessary cabling and zoning requirements. After the hosts successfully register with
the CLARiiON array, the Windows and Solaris administrators state each server has 30 LUNs allocated.
What does the storage administrator need to accomplish to ensure each server has access to the
appropriate LUNs?
A.Create the appropriate storage groups
B.Disable Access Logix
C.Enable Access Logix
D.Fix the incorrect zones
Answer: C
EMC자격증 E20-822 dump E20-822최신덤프 E20-822 E20-822
NO.20 A new CLARiiON arrives at a customer's site and an EMC Customer Engineer performs the physical
installation. The storage administrator is under a lot of pressure to have the array online and in production
by the end of the week. The storage administrator selects several Windows and Solaris servers for the
initial production rollout. The storage requirements have been agreed upon and the storage administrator
creates 30 LUNs of various sizes based upon EMC best practices.
The administrator works with the server team to install HBAs, update settings, install EMC software, and
then perform the necessary cabling and zoning requirements. After the hosts successfully register with
the CLARiiON array, the Windows and Solaris administrators state each server has 30 LUNs allocated.
What does the storage administrator need to accomplish to ensure each server has access to the
appropriate LUNs?
A.Create the appropriate storage groups
B.Disable Access Logix
C.Enable Access Logix
D.Fix the incorrect zones
Answer: C
EMC E20-822덤프 E20-822 pdf
NO.21 A customer was running a snapshot session when they noticed a SP failure. The Source LUN was
owned by the failed SP. What will happen to the session and the Reserved LUN Pool (RLP) LUN?
A.Session continues and the RLP LUNs trespass. After repairing the failed SP, the RLP LUN must be
manually trespassed to the original owning SP.
B.Session continues and the RLP LUNs trespass. After repairing the failed SP, the RLP LUN trespasses
back to the original owning SP.
C.Session gets deactivated and the SP frees the allocated LUN. After fixing the failed SP, the session will
activate and the original RLP LUN will be allocated.
D.Session stops and a new RLP LUN will be allocated on the surviving SP upon fixing the failed SP. The
RLP LUN will trespass back to the original SP and the user must manually restart the session.
Answer: B
EMC기출문제 E20-822인증 E20-822 E20-822최신덤프
NO.22 You are using Replication Manager to make clones of two production Exchange mailbox database
LUNs. After reviewing the event log for the week, you notice there have been numerous failures but no
alerts have been sent out. Replication Manager was configured to send email alerts in case of an
Exchange job failure.
What is preventing the email alerts from being sent out?
A.MAPI32.DLL is missing on the Replication Manager server
B.Outlook was not installed on the Replication Manager server
C.The Replication Manager console was not configured to relay alerts
D.The SMTP service in IIS was not configured on the Replication Manager server
Answer: D
EMC E20-822자격증 E20-822시험문제
NO.23 Click the Exhibit button.
A customer wants to create an additional 250 GB LUN on their existing RAID 6 group. How can this be
accomplished?
A.Create the LUN on another RAID 6 group using concatenation
B.Defragment the RAID group and bind the additional LUN
C.Destroy the RAID group and create the new LUNs
D.Expand the RAID group to increase the available space
Answer: A
EMC E20-822 E20-822자료 E20-822 dumps
NO.24 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC dump E20-822 E20-822 E20-822자료 E20-822
NO.25 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D
EMC pdf E20-822인증 E20-822자격증 E20-822 E20-822최신덤프
NO.26 A customer is implementing the Replication Manager/SAN Copy/RepliStor solution for DR of their
Exchange environment. In the process of configuring this solution they need to configure the RM DR
utility to run after the completion of the SAN Copy job.
Which level of IR callout should they use in order for the script to invoke at the proper time?
A.100
B.300
C.400
D.600
Answer: D
EMC자격증 E20-822자료 E20-822 dump E20-822 E20-822최신덤프 E20-822자료
NO.27 A company has implemented Replication Manager to back up their SQL Server. In addition to clone
copies every 6 hours, they have also implemented SQL Server log backups for a more granular RPO.
Last night, a junior DBA corrupted the production database. After using Replication Manager to restore
the database with no recovery, the senior DBA attempts to replay the transaction log backups but the
database returns an error indicating that no database is in a state to replay logs.
What is the cause of this restore failure?
A.Replication Manager only supports transaction log replay on databases restored with full recovery
B.rmsqlrestore.exe was not used to replay the VDI metadata
C.The restored database's SCN is out of sync with the SQL system databases
D.The transaction log backups have a gap in the sequence of transactions
Answer: B
EMC E20-822 E20-822인증
NO.28 Click the Exhibit button.
A customer wants to create an additional 250 GB LUN on their existing RAID 6 group. How can this be
accomplished?
A.Create the LUN on another RAID 6 group using concatenation
B.Defragment the RAID group and bind the additional LUN
C.Destroy the RAID group and create the new LUNs
D.Expand the RAID group to increase the available space
Answer: A
EMC E20-822최신덤프 E20-822인증 E20-822
NO.29 A company has requested an independent consultant to develop and implement a security model for
the CLARiiON storage platform. The company has limited access to the administrator role by removing
rights for all accounts. However, they would like to keep the single administrator role account for top level
management.
Management of user security should not be done by the administrator role user. In addition, the storage
object administrators should not be able to change user security when using the Secure CLI. CLARiiON
storage systems are located in a protected data center with limited physical access.
Which method should be employed to manage user security?
A.Create a Security Administrator role user and create a Manager role user account for storage object
managers.
B.Create a Security Administrator role user, enable the CLI filter, and create a Manager role user account
for storage object managers.
C.Implement security using PKI certificates, create a Security Administrator role user, and enable the CLI
filter.
D.Implement security using PKI certificates, enable the CLI filter, and create a Manager role user account
for storage object managers.
Answer: B
EMC E20-822덤프 E20-822 E20-822시험문제
NO.30 A large financial customer has a time-critical OLTP application running on a dedicated CX3-80. One of
their internal administrators believes they modified something that could have affected the production
LUN. Since then the response time has increased significantly.
What action is the likely cause of the problem?
A.Decreased the high watermark to 75%
B.Enabled auto-assignment
C.Increased queue depth to 128
D.Increased the cache write aside value to 3076
Answer: C
EMC E20-822 E20-822자격증 E20-822최신덤프
ITexamdump의 C_A1FIN_10덤프의 VCE테스트프로그램과 640-722덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 9L0-064시험에 대비한 고품질 덤프와 700-501시험 최신버전덤프를 제공해드립니다. 최고품질 70-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기